Manufacturer, Supplier & Exporter of PVC Coated Alloyed Carbon Steel Sheet

PVC Coated Alloyed Carbon Steel Sheet is a high-performance material that combines the strength and formability of alloyed carbon steel with the enhanced corrosion resistance and aesthetic appeal of a PVC coating. This dual-layered product is widely preferred for outdoor and industrial applications where both mechanical durability and surface protection are critical. Riddhi Siddhi Impex, a leading manufacturer and domestic supplier based in India, specializes in delivering premium-quality PVC coated alloyed carbon steel sheets to various sectors including construction, automotive, infrastructure, and fabrication.

Riddhi Siddhi Impex ensures strict quality control at every stage of production—from sourcing alloyed carbon steel with precise chemical composition to applying uniform PVC coatings through advanced lamination technology. These sheets exhibit improved resistance to abrasion, weathering, and chemical exposure compared to uncoated or regular carbon steel sheets. Their ability to withstand harsh environmental conditions makes them a preferred choice for roofing systems, cladding, enclosures, and industrial ducting.

The alloying elements in the steel base such as manganese, silicon, and chromium impart superior mechanical properties like high tensile strength, excellent impact resistance, and improved workability. The PVC coating further enhances these sheets by acting as a protective barrier against moisture, rust, and UV degradation. These features not only increase the life of the sheet but also reduce long-term maintenance costs, making them highly cost-effective in the long run..

As a prominent PVC Coated Alloyed Carbon Steel Sheet Domestic Supplier, Riddhi Siddhi Impex caters to a wide array of cities across India. Whether you’re located in Mumbai, Delhi, Bengaluru, Hyderabad, Chennai, Kolkata, Pune, or industrial hubs like Surat, Vadodara, Rajkot, Nagpur, or Indore, Riddhi Siddhi Impex ensures timely delivery and technical support. Their supply chain spans major urban and industrial zones including Bhopal, Jaipur, Kanpur, Lucknow, Agra, Varanasi, and Amritsar, fulfilling both bulk and customized orders.

The sheets are available in a variety of thicknesses, widths, colors, and finishes—glossy or matte—to match project-specific aesthetics or industrial requirements. These sheets can be cut-to-length or supplied in coil form based on client preference. The combination of alloyed steel strength and the protective PVC layer makes them ideal for load-bearing structures, partitions, industrial panels, and even decorative applications in modern architecture.

PVC Coated Alloyed Carbon Steel Sheet

Specifications

Parameter	Details
Base Material	Alloyed Carbon Steel
PVC Coating	One or both sides, 50 – 200 µm
Sheet Thickness	0.5 mm – 4.0 mm (base steel)
Width Range	600 mm – 1500 mm (or custom)
Length / Form	Cut to size or coil form
Surface Finish	Glossy, Matte, Textured
Corrosion Resistance	Enhanced by alloying + PVC coating
Typical Applications	Cladding, Roofing, Enclosures, Panels, Facades

Chemical Composition (Typical)

Element	Composition (%)
Carbon (C)	0.15 – 0.30
Manganese (Mn)	0.30 – 1.00
Silicon (Si)	0.10 – 0.50
Chromium (Cr)	0.20 – 0.80
Nickel (Ni)	0.10 – 0.50
Phosphorus (P)	≤ 0.04
Sulfur (S)	≤ 0.05

Mechanical Properties

Property	Typical Value
Tensile Strength	≥ 450 MPa
Yield Strength	≥ 300 MPa
Elongation	≥ 18%
Hardness	120 – 200 HB

Dimension Chart

Thickness (mm)	Width (mm)	Length (mm)	PVC Coating (µm)	Notes
1.0	1000	2000	80	Standard Size
1.5	1250	2500	100	Often used for exterior panels
2.0	1500	3000	120	Heavy duty use
3.0	1250	3000	150	Structural panels
4.0	1500	3000	200	Max thickness typical

Equivalent Grades

Standard	Grade / Equivalent
IS	IS 2062 / IS 513
ASTM	A572 / A242 / A1011
EN	S235JR, S355JR
JIS	SPCE / SPAH

Equivalent Standards

Standard	Description
IS 2062	Structural steel – hot rolled medium and high strength
ASTM A572	High-strength low-alloy structural steel
EN 10346	Continuously hot-dip coated steel
JIS G3302	Zinc coated steel sheet (for reference)

Other Types of PVC Coated Steel Sheets

Type	Description	Typical Use
PVC Coated Carbon Steel (non-alloyed)	Plain carbon steel with PVC coating	Panels, enclosures
PVC Coated Corrugated Steel Sheet	Corrugated profile	Roofing, cladding
PVC Coated Perforated Steel Sheet	Perforated holes	Ventilation, acoustic panels
PVC Coated Checker / Tread Sheet	Raised tread / checker pattern	Anti-slip flooring, walkways

Riddhi Siddhi Impex's deep technical expertise, competitive pricing, and wide distribution network across cities like Chandigarh, Mysuru, Udaipur, Jodhpur, Visakhapatnam, Coimbatore, Madurai, Kochi, Thiruvananthapuram, Mangalore, and Nashik, make them one of the most reliable names in the industry. Whether your requirement is for heavy-duty roofing panels in Dahej, Vilayat, or Somnath, or decorative wall panels in Kolhapur, Navsari, or Valsad, they offer scalable solutions backed by strong customer support.

Frequently Asked Questions (FAQs)

Q1: What is PVC Coated Alloyed Carbon Steel Sheet?

It’s a sheet where alloyed carbon steel is coated with a PVC film to combine mechanical strength, corrosion resistance, and appearance.

Q2: What are the advantages of adding alloys?

Alloying elements like chromium, nickel, or manganese improve strength, toughness, and resistance to wear and corrosion.

Q3: Can you customize thickness, coating or dimensions?

Yes, Riddhi Siddhi Impex provides customization in thickness, PVC coating thickness, dimensions, and color to suit project requirements.

Q4: Do you supply these sheets across India?

Yes, they are supplied to major domestic markets including Mumbai, Delhi, Bengaluru, Hyderabad, Chennai, Kolkata, Pune, and many more cities.